What is the reason for cutting surface of automatic aluminum cutting machine?

What is the reason for cutting surface of automatic aluminum cutting machine? This is a problem that many users will often ask during use. Many people will think that they will think of saw blade, but in actual use, it may be other factors that cause automatic aluminum cutting machine cutting surface. Non-intense.

1, saw blade. This is a factor that generally considering and exclude when the cutting surface is not smooth. By understanding the circumference of the saw blade, there is also the number of tabs, thickness, diameter and other specifications, based on the thickness of the cutting product, is reasonable?

2, cooling factor. Check if the automatic aluminum cutting machine device cooling device works normally, if the cooling is not in place, there will be no cooling in the surface of the cutting product.

3. Operating factors. Although the automatic aluminum cutting machine equipment is a simple one-type cutting equipment, the operator needs to be familiar with the method of operating equipment, especially the operator needs to deal with different shaped materials specifications and different cutting needs, adjust and correct operation. equipment. For example, when cutting some thin materials, we need to adjust the pressure of the pressure equipment. If you encounter the deformable material, you must understand the compression assistance to use the piezoelectric bit block, cutting different products using different products. Wait.

4, equipment factors. When the above probability is excluded, the problem has not been resolved, we should consider whether it is a cutting surface that causes the cutting surface caused by device factors. First confirm whether the piezoelectric pad under the press material is normal, if there is a severe wear, it will affect the stability of the cutting press, and when the material is not firmly pressed, the material is not firmly pressed, affect the surface finish of the cutting product. Alternatively, it is necessary to check whether the saw shaft of the automatic aluminum cutting machine is normal, and can be judged by hitting a percentage and listening. If the initial determination is the equipment factor, it is recommended to contact the manufacturer in time to help process.